Clear-Coat is made from urethane film, a clear and scratch-resistant material, less than 1/100th of an inch thick with an adhesive backing. Urethane films are used on cars, airplanes and boats to prevent the finish from wearing.
Quite the contrary! We made Clear-Coat so that it would be able to protect your devices from just about anything! The adhesive we use is semi-permanent, meaning that it is difficult to remove by accident, but easy to remove if you wish. So your gear is safe!
No, unfortunately, it does not. Water can still get in the seams - while Clear-Coat covers much of your phone, it is impossible to cover 100% of a device, and all its seams. Same goes with shockproof - Clear-Coat is incredibly thin, so dropping your device will still cause a shock to the system.....but when you pick it up, you'll probably notice the Clear-Coat stopped it from getting nicks and scratches.
Yes, Clear-Coat will help hide those old scratches! It's never too late, not matter how used your phone is. Your phone is only going to get worse, so why not hide the old scratches and prevent new ones with Clear-Coat?
Yes! Phones show grease, smudges and fingerprints easily. Clear-Coat is resistant to them, and will helps keep your phone looking new all the time. Stop constantly wiping your phone on your shirt to clean it, and start preventing fingerprints with Clear-Coat!
Clear-Coat is hand-made in the US. Each and every piece is designed, manufactured, assembled, inspected and shipped by someone in our Philadelphia, PA office.
Don't worry! We can design a Clear-Cost for virtually anything. If you don't see your product offered in our catalog, you can request a design. Head on over to the
Clear-Coat Design Labs page to send your request.
Only slightly - at 1/100th of an inch thick, it certainly isn't bulky, and most people can't even see it once it's applied! The film is shiny, though, so what you'll notice is that matte finishes look shinier, and shiny surfaces look so good, it's like they just came out of a showroom. We've never gotten a single complaint that the film made their device look bad. Check out our
Picture Gallery to see Clear-Coat on different devices for yourself.
We recommend using isopropyl alcohol (nothing more than 70% concentrate). If you don't have any available, you can use any glass cleaner or non-streaking cleaning fluid. Spray the cleaner on to a paper towel or microfiber cloth and wipe the Clear-Coat clean.
Check out our company blog 
